Reference table · checked November 22, 2026
Projector Input Lag for PS5, Xbox Series X and Switch 2
Gaming projectors from BenQ and Optoma state about 16–17 ms of input lag at 4K/60, which is one frame at 60 Hz. At 1080p/120 the BenQ models state 8.3 ms. The headline “4 ms” figures you see in ads are for 1080p at 240 Hz, a mode PS5, Xbox Series X and Switch 2 do not output.
This table collects what each maker publishes, for the modes consoles actually use, with a link to the page that states every number. Where ProjectorCentral measured the same model in a review, we show that result next to it. We did not test these projectors ourselves.
What each console sends to a projector
| Console | Output | Source |
|---|---|---|
| PlayStation 5 | 4K/120 output | Official page: “The PS5 console supports the HDMI 2.1 specification, and it also supports 4K 120Hz video output.” |
| PlayStation 5 | 1440p at 60/120Hz output | Official page: “If your TV supports 1440p output, you can test for SDR/HDR 60 Hz/120 Hz and VRR video output.” |
| Xbox Series X | 4K up to 120 FPS | Official page: “4K at up to 120FPS: Requires supported content and display.” |
| Nintendo Switch 2 | Docked 4K/60 | Official page: “Maximum of 3840x2160 (4K) resolution at 60 fps (TV mode)” |
| Nintendo Switch 2 | Docked 120 fps at 1080p and 1440p | Official page: “Supports 120 fps when 1920x1080/2560x1440 resolutions are selected” |
No current projector in this table accepts 4K/120. For 120 fps on a console, the projector has to take 1080p/120 (or 1440p/120, which several models accept and scale).
Input lag by model
“Maker” columns are the manufacturer’s own figures, usually in a game or fast-input mode. “Not stated” means the maker does not publish a number for that mode; it does not mean the mode is unsupported. Scroll sideways on a phone.
| Projector | Maker: 4K/60 | Maker: 1080p/120 | Maker: 1440p/120 | Maker: 1080p/240 (PC only) | Independently measured | Source |
|---|---|---|---|---|---|---|
| BenQ TK700STi | 16.7 ms | 8.3 ms | Not listed | 4.2 ms | 16.9 ms at 4K/60 and 1080p/60 | BenQ page |
| BenQ TK710STi | 16.7 ms | 8.3 ms | 8.3 ms (scaled to 1080p) | 4.2 ms | — | BenQ page |
| BenQ TK710 | 16.7 ms | 8.3 ms | 8.3 ms (scaled to 1080p) | 4.2 ms | 17 ms at 4K/60; 8 ms at 1080p/120 | BenQ page |
| BenQ X3100i | 16.7 ms | 8.3 ms | 8.3 ms (scaled to 1080p) | 4.2 ms | 17 ms at 60 Hz; 9 ms at 1080p/120 | BenQ page |
| BenQ X500i | 16.7 ms | 8.3 ms | 8.3 ms (scaled to 1080p) | 4.2 ms | — | BenQ page |
| BenQ X300G * | 16.7 ms | 8.3 ms | 8.3 ms (scaled to 1080p) | 4.2 ms | 17 ms at 60 Hz; 9 ms at 120 Hz | BenQ page |
| BenQ TK705STi * | 5 ms | No 120 Hz input | 60 Hz only | — | — | BenQ page |
| Optoma UHD35STx | 16.9 ms | Not stated | Not stated | 4.2 ms | — | Optoma page |
| Optoma UHD38x | Not stated | Not stated | Not stated | 4.2 ms | — | Optoma page |
| Optoma UHD35x | 16 ms | Not stated | Not stated | 4.2 ms | — | Optoma page |
| Optoma UHZ35ST | 16 ms | Not stated | Not stated | 4.4 ms | 18 ms at 60 Hz; 9 ms at 1080p/120 | Optoma page |
| Optoma UHD55 | 16 ms | Not stated | Not stated | 4.4 ms (mode not stated) | 16 ms at 4K/60; 7 ms at 1080p/120 | Optoma page |
| Optoma CinemaX D2 Smart | 16 ms | Not stated | Not stated | 4 ms | 19 ms at 4K/60; 8 ms at 1080p/120 | Optoma page |
| Optoma GT2000HDR * | 17 ms (4K input shown at 1080p/60) | 8.6 ms | Not stated | — | — | Optoma page |
| ViewSonic PX701-4K | Not stated | Not stated | Not stated | 4.2 ms | 16.9 ms at 4K/60 | ViewSonic page |
| ViewSonic PX749-4K | Not stated | Not stated | Supported (Xbox); lag not stated | 4.2 ms | — | ViewSonic page |
| ViewSonic X2-4K | Not stated | Not stated | Supported; lag not stated | 4.2 ms (mode not stated) | 18 ms at 4K/60; 9 ms at 1440p/120 | ViewSonic page |
| ViewSonic X1-4K * | Not stated | Not stated | Supported (Xbox); lag not stated | 4.2 ms (mode not stated) | — | ViewSonic page |
| Epson Home Cinema 2350 | Under 20 ms (resolution not stated) | — | Not stated | — | 19 ms at 4K/60; 18 ms at 1080p/120 | Epson page |
| XGIMI HORIZON S Max * | 20 ms (Game Mode, resolution not stated) | — | Not stated | — | 19 ms at 4K/60; 36 ms at 1080p/120 | XGIMI page |
| Anker Nebula Cosmos 4K SE | Under 19 ms (Extreme Game mode, resolution not stated) | — | Not stated | — | 18.4 ms at 4K/60 | Anker Nebula page |
* BenQ X300G: Some retailers list it as discontinued; check availability.
* BenQ TK705STi: BenQ's page states 5 ms at 4K/60, far below every other 60 Hz figure here. No independent measurement found; treat with caution.
* Optoma GT2000HDR: Native 1080p projector; accepts 4K and downscales.
* ViewSonic X1-4K: ViewSonic's page may be archived; check availability.
* XGIMI HORIZON S Max: XGIMI's figure is from its own input-lag blog post, not the spec sheet.
How to read these numbers
- One frame lasts 16.7 ms at 60 Hz and 8.3 ms at 120 Hz. A projector stating 16.7 ms at 4K/60 is adding about one frame of delay.
- The 1080p/240 column is for PCs. Consoles top out at 120 Hz, so that figure does not apply to PS5, Xbox Series X or Switch 2.
- BenQ lists 1440p/120 as accepted but scaled down to 1080p/120. You get the 120 Hz response, not 1440p detail.
- Maker figures assume the game or fast-input mode is on. Independent reviews show lag roughly doubling with it off (ProjectorCentral measured 33.5 ms on the BenQ TK700STi with Game Mode off), and keystone correction or digital zoom can add more.
- Measured 120 Hz results can be well above the maker’s figure. ProjectorCentral measured 36 ms at 1080p/120 on the XGIMI HORIZON S Max, against a 20 ms figure from XGIMI.
Who is missing, and why
We only list a projector when the maker publishes a lag figure we could open and read. As of November 22, 2026 we found no maker-published figure for the Hisense C2 series, Dangbei Mars Pro 2 and Atom, JMGO N1S, LG CineBeam, Samsung The Premiere and Freestyle, or XGIMI MoGo 3 Pro. We also left out the Sony VPL-XW5000ES and Epson LS12000 (figures seen only in search snippets or as a series-wide claim) and the XGIMI HORIZON 20 and 20 Max (1–3 ms claims with no independent measurement to back them).
Method and updates
Each maker figure was read on the manufacturer’s product or spec page on November 22, 2026; hover the source link to see the exact line. Independent figures come from ProjectorCentral reviews of the same model and link to that review. Specs change and pages move, so if you spot an error or a newly published figure, tell us through the contact page and we will update the table with a dated note.
You are welcome to cite or link this table. Please credit “Console Projector input lag table” and link to https://consoleprojector.com/input-lag.
Looking for picks rather than raw numbers? See our low input lag projector guide.